550W LED With USB Mobile Phone Repair Electronic Soldering Station
Parameter
| Voltage | AC (100V/110V/120V||220V/230V/240V) |
| Frequency | 50/60Hz(Optional) |
| Power | 550W |
| Heater voltage | 26VAC |
| Temperature range | 150-450°C/302-842°F |
| Temperature oset range | ±50°C/±90°F |
| Temperature accuracy | ±15°C |
| Temperature stability | ±2°C(in still air, no load) |
| Standby temperature | 150°C |
| Automatic shutdown time | 1-120 minutes |
| Temperature adjustment | 5 digits (Default)/1 digit (Fine-tuning) |
| Heater | High performance dual-wire heater |
| Temperature lock | Yes |
| Beep | Yes |
| Tip-to-ground impedance | <2 |
| Tip-to-ground voltage | <2mV |
| Dimensions | 175(L)*115(w)*95(H) mm |
| Net weight | 1.85KG |
Advantage
1. Automatic sleep to save energy.
2. Long life.
3. Smart recognition of working or non-working status.
4. Automatic standby,shuutdown with smart time setting.
5. High performance dual-core wire heater.
6. New design with LCD display screen, making control visualization.
7. Low-voltage heater separated from power supply to keep soldering work safer.
Operation Instruction
Step 1:To put the unsoldering equipment ready,and leave handle on the holder.
Step 2:To connect the power.
Step 3:To set the best nozzle(large caliber nozzle preferred)
Step 4:To switch on the power,the screen displsy "---",it represents standly mode.
Step 5:To put "up" and "down" button(revolving switch)as to set up the temperature.
Step 6:To turn the temperature switch as to set up the required temperature.
Step 7:To hold the handle,so the equipment begins to heat.
Step 8:To put back the handle on the holder after the work.
Step 9:To swich off the power and unplug if there is no operation for a long period of time.
Terms of User
1.The air outlet and its surrounding area may be very hot.Be cautious of scald.
2.The heating handle shall not be put on the working table or other place except its holder.
3.To keep the air outlet unblocked.
4.To put the heating handle on its holder after the work,and keep it cool naturally to the standby mode,then swith off the power.
5.The distance between the air outlet and the object shall be no less than 2mm.
6.To choose suitable blast nozzle may have different temperature.
Application In
1.Factory & ESD Antistatic enviroments,especially for the soldering of PCB circuit board in Electronics factory.
2.Non ESD Antistatic enviroments, especially for repairing household electrical appliances and the welding of Electronic integrated circuits and chips.
Warranty period
365days
lead time
about 3-5days after receiving payment.
Payment
TT/West Union/Paypal
Shipping Ways
We shipping by DHL/ TNT/ FEDEX/ or with customer's freight account
About us
We stick to the principle of "quality First, service first, continuous improvement and innovation to meet the customers" for the management
And "zero defect, zero complaints" as the quality objective.
We have a wide range of products, such as electrical and electronic products, electronic tools, hardware tools, computers and peripheral equipment, health care instrument, intelligent wearable equipment etc. Our products are widely used by domestic market and have been exported to many oversea countries and regions, including Europe and America regions, the Middle East, southeast Asia, Korea, Japan, India etc. With its advanced marketing concept, keen sense of marketing demand
Trade assurance:
1.100% product quality protection
2.100% on-time shipment protection
3.100% payment protection for your covered amount
FAQS:
Q1. Do your products get any certificates?
Yes, CE for EU market, FDA for USA market.
Q2. What's the guarantee, in case the machine breaks down?
24 months quality warranty. If machine breaks down, generally speaking, our technician will figure out what problem it is based on clients' feedback. Parts (excluding the consumable parts) shall be replaced for free If there is any problems during warranty period.
Q3.Can you do the design for us?
Yes. We have a professional team having rich experience in designing and manufacturing. Just tell us your ideas and we will help to carry out your ideas into perfect fact. It does not matter if you do not have some one to complete files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation.
Q4. How to pay to you?
30% deposit, 70% balance paid before delivery by T/T is prefer; small amount with PayPal is also acceptable.
Q5. How long is the delivery time?
For standard machine, it would be 3 - 5days. For non-standard/customized machines according to clients' specific requirements, It would be 15days.
Q6. Do you arrange shipment for the products?
FOB or CIF price, we will arrange shipment for you, but EXW price, clients need to arrange shipment by themselves or their agents.
Q7. How about the documents after shipment?
After shipment, we'll send all original documents to you by DHL, including Commercial Invoice, Packing List, B/L and other certificates as required by clients.
Q8. How is the packing?
Three Layers package -- (Water-proof plastic film+ Foam board protection + Solid seaworthy wood box)
If you have any query, please feel free contact with me:
Contact Information
Attn: Tracy Jiang
Mobile :+8617770853435
TEL: +(86)755 23777882
Audited Supplier 
){kind=link}