| Customization: | Available |
|---|---|
| Type: | Precision Screwdriver |
| Material: | Stainless Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| technical parameters | ||||||
| type | torque rang | Unload speed(rpm)±10% | bit | for screw tooth size(mm) | ||
| lever start type | (kgf.cm) | (n.m) | machinery tooth | self-tacking tooth | ||
| HHB-530PB | 5.0-30 | 0.5-3.0 | 1200 | S1/4 | 2.8-5.0 | 2.2-4.0 |
| HHB-520PB | 4.0-20 | 0.4-2.0 | 1200 | S1/4 | 2.4-4.5 | 2.0-3.5 |
| HHB-521LB | 8.0-21 | 0.8-2.1 | 1000 | S1/4 | 2.4-4.5 | 2.0-4.5 |
| HHB-515LD | 2.0-15 | 0.2-1.5 | 1000 | #5 | 2.2-4.2 | 1.7-3.2 |
| HHB-522CLB | 9.0-22 | 0.9-2.2 | 1000 | S1/4 | 2.4-4.5 | 2.0-3.5 |
| 1. Air tools are adversely affected by moisture. Since air from compressor contains much moisture and dust, it is | ||||||||||||||
| desirable to provide a filter and lubricator in the pipeline to remove such undesirable elements. Also take the drain out from air tank every day. | ||||||||||||||
| 2. When using brand-new air hose or air pipe. Blow and clean the inside of air hose or pipe before installation. | ||||||||||||||
| 3. Keep inside of air hose or air pipe clean to prevent airdrop problem caused by the lots of drain and dust accumulated and possibly make the inside diameter smaller in the long use. | ||||||||||||||
| 4. When disconnect air hose from air tool while in the operation do not drop air hose end to the floor as dust or other element may come into air hose. | ||||||||||||||
| 5. Use air regulator to keep stable air pressure at 5.5kg/cm²-6.0kg/cm² at the toll. It is important to get proper air pressure at the toll. | ||||||||||||||
| 6. After lubrication, oil will discharged the exhaust upon operation. Flush motor for a few seconds. | ||||||||||||||
| 7. The color ring-for torque manages and identifies...Using site management. |
){kind=link}